Why Is Saab 9-3 Key Replacement So Effective In COVID-19
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. This requires the use of a handheld computer, known as Tech-2 which is to be used by the dealer. Then a new car key and transponder need to be bought and programmed to the car.
It is an excellent idea to rotate your keys in order that one does not get worn out more quickly than the other. This will also help to keep your keys in top condition.
Replacement Case
Unlike the classic Saab keys of old keys, the new key fobs contain electronics which makes it hard to make a copy. saab key code has made stealing cars a lot more difficult than it was a few years ago. But, it has also made the replacement of lost keys a much more expensive endeavor.
Every owner of a Saab 9-3 needs to have at least two working keys. If one gets lost, it is expensive to replace it in the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to reduce the high cost. Some parts retailers will find the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade from metal for only a fraction of the dealer's cost. The key, however, must be identical to the original one in order to function within your car.
You can also change the case yourself by following these steps. You'll require an flathead screwdriver and patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once the case is open, remove the electronic components and place them inside your new case. Insert the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. This YouTube video from Cyclone Cyd shows how to replace the remote fob battery with just four easy steps. This guide should work with any modern saab key fob however the procedure might differ slightly.
The first step is to find the button that opens the backup key inside the fob. It is usually located close to the Saab logo on the back of the fob. Next, use the flathead screwdriver to insert into the small hole in this button. This should be enough to open the case so that you can change the battery.
After you have installed the battery CR1632, you are able to rebuild the remote key fob. You can then program it into your car. The entire process shouldn't exceed an hour. It's a simple procedure that doesn't require any special tools.
If you lose a key the process is a bit more involved but it is still able to be accomplished. The dealer has to find the VIN number of the car and then purchase a replacement key blade and TWICE module, both with the proper unique code. After that, they will have to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob is a device that locks and unlocks your car, it has batteries inside. They have a limited life span and will eventually die. This is a typical issue that happens to all cars, and the good news is that you can change the batteries in most fobs, without replacing the entire case. Amazon sells replacement fobs with all the electronic components in place. You can simply remove the case and replace the batteries. It's important to note that you will need to remove the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. Use the screwdriver to move around the case until it will split open, making it easy to take it out.
If you're planning to replace your keys, keep an extra set on hand. This will save you lots of money. If you have an extra key, you can ask the dealer to cut the key and program it for your vehicle. This is less expensive than buying a new key fob.
If you don't have a spare, it is possible to add a second key to your car, however it requires a lot of research and effort. It costs a few hundred dollars to purchase a second car key. The computer in the car also needs to be programmed. This can be accomplished by a professional, but it's a costly option for most owners.
Replacement Ignition
The new SAAB 9-3 has an alarm system that is more sophisticated that is based on a key code. This means that in the event that you lose your only working key, replacing it with another one could be very expensive since the car has to have a special computer module installed and it also must be specially designed to accept a different key. Locksmiths typically aren't able to program this and dealers can charge several hundreds of dollars just to program the new key!
Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) if you lose the only working key. We can reprogram the existing EEPROM on your car's computer to make it prepared for a new key. This will save you more than 50% on the cost you pay a dealer.
If you've been a long time owner of an 03-11 SAAB 9-3, you probably are aware that the ignition key isn't all that robust. They can be extremely sticky and the buttons can be ripped off at times which is why you should think about replacing your ignition key if it isn't performing as it should. The good news is that replacing the ignition key isn't as difficult as it seems, and it can be done quickly using the proper tools.